Terluran® GP-22 is an easy-flow, general-purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector.
Rheological Properties
Property
Value
Unit
Test Standard
Melt volume-flow rate, MVR
19
cm³/10min
ISO 1133
Temperature
220
°C
-
Load
10
kg
-
Mechanical Properties
Property
Value
Unit
Test Standard
Tensile Modulus
2300
MPa
ISO 527
Yield Stress
45
MPa
ISO 527
Yield Strain
2.6
%
ISO 527
Nominal Strain at Break
10
%
ISO 527
Impact Strength (Charpy), +23°C
180
kJ/m²
ISO 179/1eU
Impact Strength (Charpy), -30°C
100
kJ/m²
ISO 179/1eU
Notched Impact Strength (Charpy), +23°C
22
kJ/m²
ISO 179/1eA
Notched Impact Strength (Charpy), -30°C
8
kJ/m²
ISO 179/1eA
Thermal Properties
Property
Value
Unit
Test Standard
Temp. of deflection under load (1.80 MPa)
94
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
99
°C
ISO 75-1/-2
Vicat softening temperature (50°C/h, 50N)
96
°C
ISO 306
Burning Behavior at 1.5 mm thickness
HB
class
UL 94
UL Recognition
yes
-
-
Burning Behavior at 3.0 mm thickness
HB
class
UL 94
UL Recognition
yes
-
-
Electrical Properties
Property
Value
Unit
Test Standard
Relative Permittivity, 100Hz
2.9
-
IEC 62631-2-1
Relative Permittivity, 1MHz
2.8
-
IEC 62631-2-1
Dissipation Factor, 100Hz
48 E-4
-
IEC 62631-2-1
Dissipation Factor, 1MHz
79 E-4
-
IEC 62631-2-1
Volume Resistivity
>1E13
Ohm·m
IEC 62631-3-1
Surface Resistivity
1E13
Ohm
IEC 62631-3-2
Other Properties
Property
Value
Unit
Test Standard
Water Absorption
1
%
Sim. to ISO 62
Humidity Absorption
0.22
%
Sim. to ISO 62
Density
1040
kg/m³
ISO 1183
Rheological Calculation Properties
Property
Value
Unit
Density of Melt
927
kg/m³
Thermal Conductivity of Melt
0.202
W/(m·K)
Specific Heat Capacity
2570
J/(kg·K)
Ejection Temperature
91
°C
Processing Recommendation – Injection Molding
Parameter
Value
Unit
Pre-drying Temperature
80
°C
Pre-drying Time
2 – 4
hours
Melt Temperature
220 – 260
°C
Mold Temperature
30 – 60
°C
Tính chất
General Purpose
Xuất xứ
Korea
Chỉ số dòng chảy nóng chảy
19
IZOD
26
Tính năng
Injection
INOES GP22
$1,350
Contact Us
Ut suscipit mi cursus hendrerit ac nunc leo pellentesque eget metus massa blandit eu nulla lobortis hendrerit.
Your experience on this site will be improved by allowing cookies
Cookie Policy
